МАТЕМАТИЧЕСКАЯ МОДЕЛЬ РАСЧЕТА ТЕМПЕРАТУРЫ В ЗОНЕ КОНТАКТА ВЗАИМОДЕЙСТВИЯ ЧЕЛНОЧНОГО ГНЕЗДА И ШПУЛЬКИ ШВЕЙНЫХ МАШИН

Авторы

  • SIROJIDDIN KENGBOYEV Toshkent kimyo-texnologiya instituti Shahrisabz filiali

Ключевые слова:

slip, 3D, high-speed sewing machine, contract parts, durability, semi-finished products, heat treatment

Аннотация

The article covers the issues of increasing the level of hardness and wear resistance, reducing the level of friction resulting from sliding, or some shuttle components may have an external coating simply for the purpose of protecting against rust. The use of one or another type of coating depends on the choice of the shuttle manufacturer; in particular, hard chrome plating has been used for many years on all shuttle devices, not just on the shuttles of high-speed sewing machines. Calculations determining the effectiveness of introducing antifriction coatings on the surfaces of contacting parts have been done, in particular, tribological couplings of the shuttle socket with a bobbin have been studied in detail, which leads to an improvement in the temperature conditions of operation in the contact zone and, as a consequence, to a reduction in wear of the surfaces of contacting parts and an increase in the durability of tribological couplings.

Библиографические ссылки

Engineering of surfaces of machine parts. Appendix No. 3 to the engineering journal “Reference book” // Under the general edition by A.G. Suslov -M.: Mashinostroenie, 2007, No. 3, p. 24.

Drozdov Yu.N., Pavlov V.G., Puchkov V.N. Friction and wear under extreme conditions. - M.: Mashinostroenie, 1986, -224 p.

Blok, H., Theoretical Study of Temperature Rise at Surfaces of Actual Contact Under Oiliness Lubricating Condishions // Proc. of Gen. Discussion Lubrication and Lubricants, Instn. Mech. Engrs., Vol. 2, 1937. – pp. 222-235.

Fundamentals of tribology / Under the general edition by A.V. Chichinadze. -M.: Mashinostroenie, 2001. –664 p.

Terauchi Y., Nadano H. Studies on Scoring of Spur Gears. Bullen of the JSME, v. 22, N 164, February, 1979, pp. 226-233.

Terauchi Y., Nadano H., Kokno М. Scoring Resistance of Corper-Gear. Bulleten of the JSME, v. 27, n. 232, October, 1984, pp. 2287-2294.

N.M. Safarov, (PhD) A.T. Majidov, I.M. Mirsultanov. Calculation of change of stock moisture content of the drying agent in the process of drying raw cotton in solar drying equipment. Participated in the III International scientific conference on metrological support of innovative technologies (ICMSIT-III-2022) on March 3-6, / St. Petersburg-Krasnoyarsk. Russia.

Akbar Abrorov, Nazirjon Safarov, Mathematical model of hardening the disk-shaped saw teeth with laser beams. Participated in the II International scientific conference on “ASEDU-II 2021: Advances in Science, Engineering Digital Education” on October 28, 2022 / Krasnoyarsk. Russia.

Дополнительные файлы

Опубликован

2024-03-25

Как цитировать

KENGBOYEV, S. (2024). МАТЕМАТИЧЕСКАЯ МОДЕЛЬ РАСЧЕТА ТЕМПЕРАТУРЫ В ЗОНЕ КОНТАКТА ВЗАИМОДЕЙСТВИЯ ЧЕЛНОЧНОГО ГНЕЗДА И ШПУЛЬКИ ШВЕЙНЫХ МАШИН. Потомки Аль-Фаргани, 1(1), 34–38. извлечено от http://al-fargoniy.uz/index.php/journal/article/view/269

Выпуск

Раздел

Статьи

Категории